谁知道怎么用游泳池的定时器

bennytang

泳池有个老旧的定时器，不知道咋用，哪位大神指导一下？谢谢！

2013-11-20 21:36:30 上传
下载附件 (92.98 KB)

bennytang

我自己先乱猜一个
红的代表关闭
绿的代表开始
里圈代表？？
外圈代表？？
不懂啊。。。

白雲山民

我猜，我猜，我猜猜猜！
Ｘ圈代表小時
Ｘ圈代表分鐘

白雲山民

How to set the wattmaster Grasslin timer
http://www.fixya.com/support/t11 ... ster_grasslin_timer

bennytang

白雲山民 发表于 2013-11-20 22:45

How to set the wattmaster Grasslin timer
多谢啊，好想没有找到和我一样的。。。

白雲山民

原理一樣的。

bennytang

白雲山民 发表于 2013-11-21 09:42

原理一樣的。
呵呵，我决定放弃了，国内淘宝买一个数字的
http://detail.tmall.com/item.htm ... &id=21942908702

zxcity

You can pull the pin out from the middle of the clock and put them in holes at the outer layer of the clock. The closest two are the duration that the filter will operate. You can always put multiple sets; for example one set during day time and the other one at night.  

bennytang

zxcity 发表于 2013-11-21 09:57

You can pull the pin out from the middle of the clock and put them in holes at the outer layer of th ...
You can pull the pin out from the middle of the clock and put them in holes at the outer layer of the clock. The closest two are the duration that the filter will operate. You can always put multiple sets; for example one set during day time and the other one at night.  
终于有人懂了！
所以颜色没啥用对吧？
此外请问：这个东西看上去好像纯粹是个机械设备，他怎么知道哪2个更close？另外，极端的，如果我想设置工作0-12点工作，怎么弄？
分数等回血了给你加

zxcity

bennytang 发表于 2013-11-21 14:42

You can pull the pin out from the middle of the clock and put them in holes at the outer layer of  ...
0-12点不要跑这么久吧，一般先转那个时间表让他的时间和真实时间一致。颜色没什么讲究，不过是同一组的话一般用同一个颜色。