如果要买新kluger，只能选顶配

iamwhoami · 发表于 2014-4-9 16:27:44

a711012 发表于 2014-4-9 21:51
CX9现在应该是最好砍价的吧，顶配估计可以58k拿下
gt早就可以5万6以下拿到了但是内部空间不合理，第三排还是和PF的有差距，内饰总体不错但有几个按钮质感很廉价的赶脚，油耗大，外形尺寸大（车头那块为了造型搞得很尖很长，实际上里面是空的）停车不方便，视野不好，没有环绕摄像机，可能也快更新了，所以如果不是价格特别合适还是建议看看别的

a711012 · 发表于 2014-4-9 18:03:10

iamwhoami 发表于 2014-4-9 21:31
gt早就可以5万6以下拿到了但是内部空间不合理，第三排还是和PF的有差距，内饰总体不错但有几个按钮质感 ...
是，感觉里面显得比Kluger和PF都显得旧。屏幕也小。

a711012 · 发表于 2014-4-9 16:44:54

Whirlpool 上有人说的Actually I suggest if you want to buy a new pathfinder, doesn’t matter demo or new one, it’s all 2014 model for Australia market.
Just don’t touch those build date before Sept last year, they have big chance to get that CVT issue.
After September , Nissan has some software upgrade, new version torque convert version and some kind of new seal for CVT. Hope those can fix that CVT issue.You can check the driver door frame to find out build date (not compliance date), or you can have a clue through VIN number, if your VIN number last 5 digitals (it’s serial number) > 24000 around, it should be okay.
Maybe I’m not right, because I haven’t got my Dec built one and test it.
If my December one also has issue, I will update here to let you don’t touch those before Dec ?