Syd厨房报价

davidan

三楼亲上一楼 发表于 2013-12-8 22:11

其实呢，整个厨房是3*5.5
但厨房因为做成u shape 所以大概10平
So the variations are the gas fitting and floor preparation. That's $3000+.
That sounds in the marketing range from a formal business. You will pay attention on the 2pac finish quality and time frame. Ask where the supplier has the 2pac done so they know you care of the quality. There are so many 2pac finished cabinets in the market. Some are good and some are so so. Check the sample piece and see if that's what you want.

jack064

happydtd 发表于 2013-12-8 22:18

10平米，在freedom做得，报一万四。实际要超过些。
我家也是那里做的
便宜不下来的
橱柜加台面就已经一万五了，乱七八糟一配齐两万五不夸张

三楼亲上一楼

davidan 发表于 2013-12-8 22:59

So the variations are the gas fitting and floor preparation. That's $3000+.
That sounds in the ma ...
do you mind if i ask you a silly question: what is 2pac referring to?

davidan

三楼亲上一楼 发表于 2013-12-9 09:41

do you mind if i ask you a silly question: what is 2pac referring to?
就是通常说的烤漆。这个工艺过程耗时长较昂贵。且成品质量差异较大。Bunnings 有些洗手台柜子也是烤漆。 钢琴也是。对比一下就知道差异了。

dinone

finger pull的和用handle的相差不会超过500块，S/C的hardware也分很多种，价格也差一些，你要问清楚，搞不清的话就全要Blum的，这些如果全都poly的话，找工厂做应该不超过一万，而且是40mm的石头台面，水电工的费用另算

三楼亲上一楼

dinone 发表于 2013-12-9 11:11

finger pull的和用handle的相差不会超过500块，S/C的hardware也分很多种，价格也差一些，你要问清楚，搞不 ...
builder said the bench top will be 20mm, but 40mm at the edge.
or i can choose 30mm throughout which will be more expensive.